Material testing machines
img img img img
Our Products
   
B I E
   
FSA
BIE
FASNE
META TEST
LG
SIOMM
 
 
img DYNAMIC BALANCING MACHINES - HORIZONTAL TYPE img DYNAMIC BALANCING MACHINES - VERTICAL TYPE
img DSP BASED DYNAMIC BALANCING MACHINES img BELT DRIVEN DYNAMIC BALANCING MACHINES -
HORIZONTAL TYPE
img STROBO-DYNAMIC BALANCING MACHINES img VICKERS CUM BRINELL HARDNESS TESTING MACHINES
img DIGITAL ROCKWELL / ROCKWELL CUM BRINELL HARDNESS TESTING MACHINES img DIGITAL ROCKWELL CUM ROCKWELL SUPERFICIAL HARDNESS TESTING MACHINES
 
 

DYNAMIC BALANCING MACHINES - HORIZONTAL TYPE
( Model : FBM - M )

  • Hard bearing type horizontal end driven two plane machines with microprocessor based or DSP based measuring panel.
  • Suitable for balancing of different types of rotors like rotor of electrical machines, fly wheels, crankshafts, submersible pump rotors, etc.
DYNAMIC BALANCING MACHINES - HORIZONTAL TYPE
  • Measures & stores the unbalance in gms along with the angle for two selected correction planes on digital display.
  • Additional bed length with or without gap bed arrangment can be provided at extra cost for extra long rotors.
  • Additional center height arrangement is also possible to accommodate bigger
    diameter rotors
  • Minimum achievable unbalance upto 0.5 micron shift in c.g.
  • Various Models Suitable for rotors from 0.5 kg to 10,000 kg.
  • Horizontal belt driven hard bearing two plane machines are also supplied for rotors weighing from 0.1 kg upto 3000 kg.
  • Unbalance indication either by stroboscopic method or photo scanning method sensitivity upto 0.5 micron.
  • Computerized / Electronic versions with printer facility & special machines to suit customers requirements can also be supplied.
  • Machines conform to IS:13277-1992.
<<TOP>>

DYNAMIC BALANCING MACHINES - VERTICAL TYPE

DYNAMIC BALANCING MACHINES - VERTICAL TYPE
( Model : FVBM - M )

  • Vertical type hard bearing machines for single plane balancing of rotors like clutch plates, fan blades, fly wheels, magnetos, grinding wheels, impellers, pulleys, etc.
  • Microprocessor based or DSP based measuring panel with auto compensation facility.
  • Minimum achievable unbalance upto 0.5 micron shift in c.g.
  • Various Models Suitable for rotors from 0.3 kg to 300 kg.
  • Computerized / Electronic versions with printer facility & as per customers requirements can also be supplied.
  • Machines conform to IS:13277-1992.
<<TOP>>

DSP BASED DYNAMIC BALANCING MACHINES
( Models : FBM - D & FVBM - D )

  • All specifications mentioned under Models : FBM-M
    & FVBM-M.
  • 32 bit DSP based all digital hardware in compact foot print.
  • Enhanced accuracy& repeatability with fast response.
  • Auto calibration.
DSP BASED DYNAMIC BALANCING MACHINES
  • RS 232 / USB interface, thermal printer interface (Optional).
  • Rotor programing up to 100 Nos.
  • Negligible power consumption.
<<TOP>>

BELT DRIVEN DYNAMIC BALANCING MACHINES -
HORIZONTAL TYPE

BELT DRIVEN DYNAMIC BALANCING MACHINES -
HORIZONTAL TYPE ( Model : FSBM - M )

  • Horizontal, hard bearing type two plane dynamic balancing machine, with overslung type belt drive arrangement.
  • Most suitable for the rotors, where end drive cannot be used or where variety of rotors is more and number of adopters required are more for end drive machine.
  • Typical application are balancing of bomb shells for ordnance factories, pipes, printing machine rolls, etc.
  • Machine are available from 10 kg. to 3000 kg. capacity in various models.
  • Measuring Control panel is microprocessor based or DSP based, indicating amount of unbalance in gms. along with degree, by using photo scanning arrangement for generating reference signal.
  • Speed range is from 300 rpm to 3000 rpm.
  • Balancing accuracies achievable up to 0.5 microns for maximum rotor weight
  • Machines are more suitable for repairy workshops, where variety of rotors to be balanced is more.
  • Machines conform to IS:13277-1992.
<<TOP>>

STROBO-DYNAMIC BALANCING MACHINES
( Model : SSBM - 3 )

  • Small & compact machine with high accuracy for balancing of small rotors like textile spindles, electric power tool armature, etc.
  • Special electrodynamic pickups are used for sensing minute vibration due to imbalance in the rotor.
STROBO-DYNAMIC BALANCING MACHINES
  • Machine is provided with electronic measuring control panel with digital panel meter for amount indication & xenon flash tube with brilliant white light for locating position of unbalance.
  • Machine is very sensitive & accuracies of the order of 0.2 micron.
  • Suitable for rotors from 0.1 kg to 3 kg.
  • Balancing speed range is 800 to 3000 rpm.
<<TOP>>

VICKERS CUM BRINELL HARDNESS TESTING MACHINES

VICKERS CUM BRINELL HARDNESS TESTING MACHINES
( Model : BV )

  • Suitable for finding out Vickers / Brinell hardness of metals from soft to very hard.
  • Push button control for load selection.
  • Large size table for wide range of springs with motorized rapid adjustment of test height.
  • Optical Magnifications - 35X, 70X & 140X available.
  • A precision Diamond Indentor (136° Pyramid) is used to make sharp indentations on the specimens / samples.
  • Maximum Test height x Throat : 250 x 150 mm.
  • Load accuracy well within ± 1% of nominal load value. Machine conform to IS :1754.
  • Computerized model is available .Computerized model has built in CCD and suitable advanced software. Hardness will be displayed on computer monitor automatically. Results printout can be taken.
<<TOP>>

DIGITAL ROCKWELL / ROCKWELL CUM BRINELL HARDNESS TESTING MACHINES ( Models : TRS-DN, TRB-DN, TRB-250-DN & TRS-DN-P )

  • These machines are designed for measuring hardness of metals and alloys of all kinds, hard or soft, whether round, flat or irregular in shapes.
  • Semi - Automatic, motorized, digital, microprocessor based panel. We can get hardness value in digital version.
DIGITAL ROCKWELL / ROCKWELL CUM BRINELL HARDNESS TESTING MACHINES
  • Easy to read, large size LCD display.
  • Three modes of operation viz. Motorized automatic mode, Semi automatic mode & Manual mode.
  • Automatic weight selection by thumb wheel.
  • Indenter is guided in linear bearings facilitates to test small diameter jobs.
  • Test height x Throat is 290 x 133 mm.
  • Centronics parallel port for connecting dot matrix printer.
  • Serial Interface (RS-232 Port) is provided for connecting it to Computer.
  • Standard Software CD is provided which consists of Serial Number, Hardness values & Limits.
  • Least count for Rockwell scale is 0.1 HR.
  • For Rockwell cum Brinell Hardness Testing Machine, additional Brinell loads in addition to Rockwell loads & Brinell Microscope of 25X magnification are provided.
  • Machines strictly conform to IS:1586-2000, BSEN-ISO-6508-2, ASTM-E-18 for Rockwell tests and IS:2281-2005, BS -240, ASTM-E-10 for Brinell tests.
<<TOP>>

DIGITAL ROCKWELL CUM ROCKWELL SUPERFICIAL HARDNESS TESTING MACHINES

DIGITAL ROCKWELL CUM ROCKWELL SUPERFICIAL HARDNESS TESTING MACHINES ( Model : TSM-DM )

  • This machine is designed for measuring hardness of metals and alloys of all kinds, hard or soft, whether round, flat or irregular in shapes.
  • Semi - Automatic, motorized, digital, microprocessor based panel. We can get hardness value in digital version.
  • Easy to read, large size LCD display.
  • Three modes of operation viz. Motorized automatic mode, Semi automatic
    mode & Manual mode.
  • Automatic weight selection by thumb wheel.
  • Indenter is guided in linear bearings facilitates to test small diameter jobs.
  • Test height x Throat is 290 x 148 mm.
  • Centronics parallel port for connecting dot matrix printer.
  • Serial Interface (RS-232 Port) is provided for connecting it to Computer.
  • Standard Software CD is provided which consists of Serial Number, Hardness values & Limits.
  • Least count for Rockwell scale is 0.1 HR & Rockwell Superficial scale is 0.2 HR.
  • Machines strictly conform to IS:1586-2000, BSEN-ISO-6508-2, ASTM-E-18 for Rockwell tests and 1586-2000 & ASTM-E-18 for Rockwell superficial tests.
<<TOP>>
;
Stay Connected
 
S.R.ENTERPRISES Copy Right 2014 | Privacy Policy
Address

Address:
207, Gurupruthivi Towers,
Bheeramguda, Ashoknagar,
Hyderabad - 502 032,
Telangana (INDIA)
Contact
Contact Person:
Ram Prasad Shukla - +91 9959626575
 
E-mail       :    info@srtesting.in

                                      guruv2000@yahoo.co.in

Website    :    www.srtesting.in
Media Google+ Twitter Rss Facebook
  Website Design, SEO Marketing, Digital Marketing by Innovative Ecom